Panasonic DMP-BD79GA Service Manual page 20

Error Code Diagnosis contents
F34 Initialization error
F58 Drive hardware error
F74 HDMI Device Key Communica-
tion error
F75 HDMI Device Key Loading
error
F99 Hang-up
UNSUP- Unsupported disc error
PORT
NO READ Disc read error
HARD Drive error
ERR
SELF Restoration operation
CHECK
UNFOR- Unformatted disc error
MAT
PLEASE Unit is in termination process
WAIT
No PLAY When there is a viewing restric-
tion on a BD-Video or
DVD-Video.
Description
When initialization error is detected after start-
ing up main microprocessor, the power is
turned off automatically. The event is saved in
memory.
When drive unit error is detected, the event is
saved in memory.
This error is displayed when the information
error is occurred at HDMI device key loading.
This error is displayed when the key of loaded
is illegal at HDMI device key loading.
Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BD Drive.
This error is displayed when the unformatted
DVD-RAM/DVD-RW or the DVD-RW
recorded by another make of recorder is
inserted.
Unit is in termination process now.
[BYE] is displayed and power will be turned
off.
Rating password is set.
20
Monitor Display Automatic TV display
No display No display
No display No display
No display
No display
No display
"F99" is displayed utill the
[POWER] key is pressed.
"This disc is
incompatible."
It is displayed for 5 seconds.
The character indication flows
sideways.
"Cannot read.
Please check the
disc."
"BD drive error."
It is display for 5 seconds.
The character indication flows
sideways.
No display
The character indication flows
sideways.
No display
This disc is not formatted properly.
Format the disc in DISC
MANAGEMENT?
No display
The character indication flows
sideways.
No display