Canon iB4100 series Online Manual page 650

Hide thumbs Also See for iB4100 series:
Table of Contents

Advertisement

1313
Cause
Paper is jammed inside rear cover as printer pulled in printed paper.
What to Do
If the paper is jammed inside the rear cover as the printer pulled in the printed paper, remove the paper by
following these steps.
Important
• If the printed paper piles up on the paper output slot, the printer may pull it in and the paper is
jammed inside the printer. Remove the printed paper from the paper output tray before it amounts to
75 sheets.
Note
• If paper becomes jammed during printing and you need to turn off the printer to remove it, press the
Stop button to stop the printing before you turn off the printer.
1. Rotate printer so that rear side of printer faces toward you.
2. If protective material for rear cover remains attached, remove it.
3. Open rear cover.
Slide the rear cover to the left then open it.
650

Advertisement

Table of Contents
loading

Table of Contents