Panel Factory (+) - Pioneer PDP-5000EX Service Manual

5

8.2.2 PANEL FACTORY (+)

The factory menu section of the panel side is displayed.
¶ Operation items
No. Display Item
1 PANEL INFORMATION
2 PANEL WORKS
3 POWER DOWN
4 SHUT DOWN
5 PANEL-1 ADJ (+)
6 PANEL-2 ADJ (+)
7 PANEL REVISE (+)
8 ETC (+)
9 RASTER MASK SETUP (+)
10 PATTEN MASK SETUP (+)
11 COMBI MASK SETUP (+)
Panel Factory Function
Displays the Factory menu, which enables adjustment of the panel via the screen display.
1. Character display area
• Mask indication during Panel Factory mode
If the Mask indication is set during Panel Factory mode, the GUI indication is displayed for 1 second at one layer
of the panel factory menu, followed by switching to the mask and drive sequence that have been set. For details
on the communication format with the main microcomputer.
5
6
The software version and backup status of the DIGITAL Assy are displayed.
The counts of the Pulse Meter and Hour Meter are indicated.
The power-down history is indicated.
The shutdown history, as detected by the Module Microcomputer, is displayed.
The SUS waveform and drive power can be adjusted.
The panel white balance and ABL can be adjusted.
The panel degradation correction level can be set.
Copying of backup data and clearance of various data can be done.
The mask screen (PASTER) is displayed.
The mask screen (PATTERN) is displayed.
The mask screen (COMBI) is displayed.
PDP-5000EX
6
7
Content
7
8
A
RS-232C
Command
QST
QIP
QPD
QSD
–
B
–
–
–
MKS
MKS
MKC
C
D
E
F
129
8