Settings; Settings For Using Applications Of Ipod Touch/Iphone/Android - Kenwood DDX7051BT Instruction Manual

SETTINGS

SETTINGS
Settings for using applications of
iPod touch/iPhone/Android
Before using applications of iPod touch /iPhone/
Android, select the device to use.
When connecting the device for the first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
Preparation:
• For Android: Connect the Android device via
Bluetooth. (Page 53)
• For iPod touch/iPhone:
– Connect iPod touch/iPhone with a cable
(Page 82 ) or via Bluetooth (Page 53).
– Select the connection method of iPod touch/
iPhone on <iPod Setup>. (Page 23)
1
Display the <APP Setup> screen.
On the Home screen:
• If [Enter] for <APP Setup> cannot be
selected, put the unit in standby. (Page 10)
2
Select the device type (1), then press
[Change] (2).
3
Select the connection method (1), then
confirm the selection ([OK] or [Next]) (2).
For Android:
[Bluetooth] Select this when the device is
connected via Bluetooth. (Go to
step 4.)
[HDMI/MHL+ Select this when the Android
Bluetooth]* device is connected both by
cable KCA-MH100 (optional
accessory) or KCA-HD100
(optional accessory) to the
HDMI/MHL input terminal and
via Bluetooth. (Go to step 4.)
For iPod/iPhone:
[USB 1 Select this when the iPod/iPhone
Wire] is connected using KCA-iP102
(optional accessory) or KCA-iP103
(optional accessory).
[USB + Select this when the iPod/iPhone
AV-IN] is connected using KCA-iP202
(optional accessory).
[Bluetooth] Select this when the iPod/iPhone
is connected via Bluetooth. (Go
to step 4.)
[HDMI + Select this when the iPod/iPhone
Bluetooth]* is connected using HDMI cable
KCA-HD100 (optional accessory)
and KCA-iP103 (optional
accessory) through a Lightning-
Digital AV adapter (accessory of
the iPod/iPhone). (Go to step 4.)
4
When selecting [HDMI + Bluetooth]* or
[Bluetooth] as the connection method,
the paired device list appears. Select the
target device (1), then press [OK] to
connect (2).
• If the device is already connected, skip step 1.
* Appears only for DDX7051BT/DDX751WBTL/DDX517BT .
ENGLISH 61