Panasonic ES-LV6N Operating Instructions Manual page 14

2
Press when finished.
While using
The used time and
remaining battery capacity
are shown and then turn off
after 7 seconds.
• The shown time returns to
[0'00"] after 10 minutes.
• The shaving sensor lamp
( ) blinks.
When the battery capacity is low
"10%" appears and " " blinks.
• You can shave 1 to 2 times after "10%"
appears. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
approximately 5 °C or lower.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not
react and the driving sound may not change. This is not
abnormal.
• To prevent erroneous operation, place your fingers on the
finger rest while using the shaver.
14
After use
The used time and
remaining battery capacity
blink alternately and then
turn off after 8 seconds.
• The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while the
shaver is not operating (the switch lock is unlocked).
(See page 15.)
You cannot shave in this mode.
Locking/unlocking the power switch
Locking the power switch
1. Press once 2. Press
and then release. than 2 seconds.
• The shaver • The switch lock
starts operating. lamp (
up for 5 seconds
and turn off.
• The shaver will
stop operating.
Unlocking the power switch
1. Press for more than
2 seconds.
• The switch lock lamp (
will turn off.
for more 3. Release
) will light
2. Once the shaver starts
operating, release
)
.
.