Table of Contents
Advertisement
REV.-A
4.2.6.14 Paper Feed Roller Shaft Set Removal
Step 1 Remove the platen unit. (See Section 4.2.6.11)
Step 2 Remove the lower paper guide. (See Section 4.2.6.13)
Step 3 Remove the four paper feed lever springs from the hooks of the base
frame, then remove the paper feed roller shaft set.
Paper feed
roller shaft
Paper feed
lever spring
Base frame
Figure 4-52. Paper Feed Roller Shaft Set Removal
ASSEMBLY POINT:
•
Before installing the paper feed roller shaft set, perform lubrication as indicated in Figure 6-4 in
Chapter 6.
4-42
Advertisement
Table of Contents
