Technical Information; Technical Data - Zanussi ZRB36104WA User Manual

6
5
9. Screw off the screws of the lower hinge
and remove the hinge (8).
10. Screw off the lower cover plugs and screw
them into the hole on the opposite side (7).
11. Put the lower hinge on the opposite side
and fix it with the screws (8).
7
8
12. Place the lower door on the lower hinge
pivot (9).
13. Screw off the middle cover plugs and screw
them into the hole on the opposite side
(10).
14. Put the middle hinge on the opposite side
and fix it with the screws (11).
10
o
180
11
9

Technical information

Technical data

Height
Width
Depth
Rising time
www.zanussi.com
15. Place the upper door on the middle hinge
pivot (12).
16. Fix the door with upper hinge and fix it with
screws of it (13).
13
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the
cabinet.
• The door opens and closes
correctly.
If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit
perfectly to the cabinet. In that case,
wait for the natural fitting of the
gasket. In case you do not want to
carry out the above mentioned
operations, contact the nearest After
Sales Service Force. The After Sales
Service specialist will carry out the
reversibility of the doors at your cost.
mm
mm
mm
Hours
12
1845
595
642
30
29