Menu List; Video Input - Roland XS-82H Reference Manual

Menu List

Pressing the [MENU] button displays the menu.
MEMO
5 The default value is printed in bold characters.
5 You can return the menu item you're setting to its factory-default value by holding down the [VALUE] dial and pressing the [EXIT] button.
5 You can change the setting value in larger steps by holding down the [VALUE] dial as you turn it.

VIDEO INPUT

* The ranges of settings vary according to input/output format. Also, some changes to setting values do not alter the video picture.
Menu item
2nd level 3rd level
INPUT-1
INPUT SELECT
:
INPUT-8
HDCP INPUT ENABLE (*2)
AUTO SAMPLING
COLOR SPACE
FLICKER FILTER
ZOOM
TYPE
MANUAL SIZE H
MANUAL SIZE V
POSITION H
POSITION V
FLIP VERTICAL
BRIGHTNESS
CONTRAST
SATURATION
RED
GREEN
BLUE
FREQUENCY
PHASE
(*1): "SHARE" can be set using INPUT-2 through 8. This enables sharing of the video source on the channel previous to the set channel. For details, refer to the Owner's Manual,
"Sharing a Video Source (SHARE)" (p. 19).
(*2): This can be set only when "INPUT SELECT" is set to "HDMI. "
(*3): This can be set only when "INPUT SELECT" is set to "HDMI" or "RGB/COMPONENT. " It has no effect during component signal input.
(*4): This can be executed only when the corresponding video input channel has been selected with cross point. It has no effect during component signal input.
(*5): This can be set only when "INPUT SELECT" is set to "RGB/COMPONENT. "
(*6): When the settings described below are in effect, reducing to smaller than the input size is not possible.
5 When the "MODE" setting is a value from "ROTATION-L1" to "ROTATION-L4" or from "ROTATION-R1" to "ROTATION-R4"
5 When "INPUT SELECT" is set to a value from "STILL1" to "STILL4"
(*7): Vertical flipping is not possible when "INPUT SELECT" is set to a value from "STILL1" to "STILL4. "
Value
HDMI, RGB/COMPONENT, COMPOSITE, YC, STILL1,
STILL2, STILL3, STILL4, SHARE (*1)
DISABLE, ENABLE
(*3) (*4) (ENTER)
(*5) AUTO, RGB (0-255), RGB (16-235), YCC (SD), YCC (HD) This sets the color space for input video.
(*5) OFF, ON
(*6) 10.0 %–100.0 %–1000.0 %
FULL, LETTERBOX, CROP, DOT BY DOT, MANUAL
-2000–0–2000 (pixel)
-2000–0–2000 (pixel)
-1920–0–1920 (pixel)
-1200–0–1200 (pixel)
(*7) OFF, ON
-64–0–63
-64–0–63
-64–0–63
-64–0–63
-64–0–63
-64–0–63
(*3) -128–0–127
(*3) -128–0–127
Description
This sets the type of video signal to input.
This sets whether input of copyright-protected (HDCP) video is permitted
(p. 20).
This executes automatic adjustment during RGB signal input.
Setting this to "ON" reduces flicker in input video.
This adjusts the zoom ratio of input video.
This adjusts the aspect ratio of input video.
This adjusts the horizontal size of input video.
This adjusts the vertical size of input video.
This adjusts the horizontal position of input video.
This adjusts the vertical position of input video.
Setting this to "ON" flips input video vertically.
This adjusts the brightness of input video.
This adjusts the contrast of input video.
This adjusts the color saturation of input video.
This adjusts the red level of input video.
This adjusts the green level of input video.
This adjusts the blue level of input video.
This adjusts the frequency.
This adjusts the phase.
3