Cable Routing - Fujitsu PRIMERGY BX300 Operating Manual

Cabling the System
4.4.2

Cable Routing

Front side
If PCI modules are installed, cable routing on the front side is required. In this
case a cable support (figure 9, position 1 (a, b, c, d)) must be mounted at first
on the front of the server. Additionally a cover with passage opening (2) and a
cable guide (3) must be mounted in the expansion area of the rack.
Figure 9: Components for cable routing from the front side
1 cable support (two brackets (a, b), support (c), cable tie (d))
2 cover with passage opening
3 cable guide with cable clips
34 Rev. 8.0
Installing the Hardware
A26361-K863-Z102-8-7619