Status Indicators; Power Lamp; Status Lamp - NEC Express5800/120Rd-2 Service Manual

1-10 System Overview

STATUS INDICATORS

This section describes the server indicator lamps.

POWER Lamp (

The POWER lamp is on (green) when power is applied to the server and the power switch is on.
It is off if power is not applied to the server.
This server does not support the power saving mode.

STATUS Lamp (

Server STATUS lamps are located on the front and rear panels of the server. The STATUS lamps
are on (green) while the server is operating normally. If the STATUS lamps are off or turn amber
and flash it indicates that the server is in an abnormal state.
The table below provides more details on the system STATUS lamps.
NOTES:
If ESMPRO or the offline maintenance utility is installed, you can
!
confirm the cause of a failure by referring to the error log.
If shutdown processing can be performed through the operating
!
system, restart the system by performing normal shutdown processing.
If shutdown processing cannot be performed, restart the system by
resetting, forcibly turning the power off, or disconnecting and then
connecting the power cord.
)
)