Panasonic Lumix DMC-FZ2500 Owner's Manual page 44

Recording
3
Set the cropping start frame.
A Cropping start frame
• When making settings for the first time, a cropping start
frame of size 1920k1080 is displayed. (After setting the
cropping start frame and end frame, the start frame and
end frame that you set immediately before will be
displayed.)
• The camera will remember the frame position and size
even when the camera is turned off.
Button operation
3/4/2/1
[DISP.]
[MENU/SET]
4
3
Repeat step
B Cropping end frame
• The setting of the Auto Focus Mode switches to [š]
(The eye to be in focus is not indicated.)
5
Press the motion picture button (or shutter button)
to start recording.
• Immediately release the motion picture button (or the shutter button) after pressing it.
• When the set operating time has elapsed, recording automatically ends.
To end recording midway, press the motion picture button (or the shutter button) again.
∫ Changing the position and size of a crop frame
Press [Fn6] while the recording screen is displayed, and perform steps
∫ To cancel [4K Live Cropping] recording
2
Set [OFF] in step
• The following [Rec Format] and [Rec Quality] settings cannot be used:
– A [Rec Format] setting of [AVCHD]
– [Rec Quality] settings with a size of [4K] or [C4K]
– [Rec Quality] settings with a frame rate of [60p] or [50p]
44
DVQX1028 (ENG)
Touch operation
, and then set the cropping end frame.
.
Touching Moves the frame
Enlarges/reduces the frame
Pinch out/
(The range of settings allowed is
Pinch in
from 1920k1080 to 3840k2160.)
Returns the position of the frame
[Reset] to the center and its size to the
default setting.
Decides the position and size of
[Set]
the frame
.
Description of operation
3 4
and .