Illegal_Command (Id: 00200212); Illegal_Command (Id: 00200213) - D-Link DFL-260E Log Reference Manual

2.1.78. illegal_command (ID:
00200212)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.78. illegal_command (ID: 00200212)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.79. illegal_command (ID: 00200213)

Default Severity
Log Message
Explanation
Gateway Action
WARNING
FTPALG: Unexpected telnet control chars in control channel from
<peer>. Closing connection
Unexpected telnet control characters were discovered in the control
channel. This is not allowed according to the FTPALG configuration,
and the connection will be closed.
close
If unknown commands should be allowed, modify the FTPALG
configuration.
1
peer
ALG Module Name
ALG Session ID
Connection
WARNING
FTPALG: Failed to parse command from <peer> as a FTP command.
String=<string>. Closing connection
An invalid command was received on the control channel. This is not
allowed, and the connection will be closed.
close
If unknown commands should be allowed, modify the FTPALG
configuration.
1
peer
string
ALG Module Name
ALG Session ID
Connection
WARNING
FTPALG: Failed to parse command from <peer> as a FTP command.
String=<string>. Rejecting command
An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
rejecting_command
69
Chapter 2. Log Message Reference