Error Buffer - Philips 27PS60S321 Technical Service Data

SPMS
4. Switch the ComPair interface OFF.
5. Switch the television set OFF (and remove theAC power).
6. Connect the ComPair interface cable betweenthe connector on the rear side of the
ComPair interface (marked"I2C") and the ComPair connector on the mono carrier
(Connector0267).
7. Plug the AC power adapter in the AC power outletand switch on the ComPair interface.
The green and red LEDs lightup together. The red LED turns off after approximately 1
second,while the green LED remains lit.
8. Start the ComPair program and read the "introduction" chapter.
Figure: ComPair Connection
How To Order
ComPair order codes:
ComPair InterfaceBox 4822 727 21631
CDR Interface board 3122 785 90200
TV cable 3122 785 90004
DVD cable 3122 785 90017
BETA CALIBRATION DISK 7104 099 93132
Extra Com Cable S83-940
AC Adapter T405-ND

Error Buffer

The error code buffer contains all errors detectedsince the last time the buffer was erased. The
7/8/2004
Page 12 of 16