8.3.
Checking of Main P.C.B. (Side
A)
• Refer to (Step 1) - (Step 3) of item 8.1.
Step 1 : Remove 2 screws.
Step 2 : Detach the 8P wire from connector (CN602) on the D-
AMP P.C.B..
Step 3 : Remove the 2 Rotary Knobs.
Downloaded from
www.Manualslib.com
manuals search engine
Step 4 : Lift up the Main Chassis Block.
Step 5 : Place the Main Chassis Block on an insulator material
on the Rear Cabinet block.
Step 6 : Remove 2 screws.
28