Checking Of D-Amp P.c.b - Panasonic RF-D10EG Service Manual

Step 4 : Place the Front and Rear Cabinet Block as shown in
the diagram.
Step 5 : Remove 2 screws.
Step 6 : Place the Power P.C.B. on an insulator material.
Step 7 : Upset the Power P.C.B..
Step 8 : Power P.C.B. can be checked as diagram shown.
Downloaded from www.Manualslib.com manuals search engine
8.2.

Checking of D-AMP P.C.B.

• Refer to (Step 1) - (Step 3) of item 8.1.
Step 1 : Place the Front and Rear Cabinet Block as shown in
the diagram.
Step 2 : D-AMP P.C.B. can be checked as diagram shown.
27