License Plate Lamp - Dodge journey 2017 Owner's Manual

License Plate Lamp

1. Push the small locking tab sticking out of the end of the
lens toward the side of the vehicle and hold it in that
position.
License Lamp
MAINTAINING YOUR VEHICLE 485
2. Insert a small flat-blade tool between the end of the lens
with the locking tab and the surrounding housing and
then pivot the tool to separate the lens from the housing.
3. Hold the lens with one hand and rotate the bulb's
electrical connector ¼ turn counterclockwise with the
other hand and then separate the bulb and connector
assembly from the lens.
4. Remove the bulb from the connector socket and install
the replacement bulb.
5. Install the bulb and connector assembly into the lens
and rotate the connector ¼ turn clockwise to lock it in
place.
6. Insert the end of the lens without the locking tab into the
housing on the liftgate and then push the opposite end
of the lens into the housing, making sure it locks in the
housing.
7