Acura MDX 2017 Owner's Manual page 182

■
Storing a Position in Memory
Memory Button 1
SET Button Memory Button 2
■
Recalling the Stored Position
Memory Buttons
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat, the steering wheel and the
door mirrors to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
1. Change to P .
(
2. Apply the parking brake.
3. Press a memory button ( ( 1 or
u You will hear the beeper, and the
indicator light will blink.
The seat, the steering wheel and the door
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
•
You set the power mode to any position except
ON.
( 1 or ( 2
1Recalling the Stored Position
The seat, the steering wheel and the door mirrors will
stop moving if you:
•
Press the SET button or memory button
( 2 ).
•
Adjust the seat position, door mirrors, or steering
wheel.
•
Select into a position other than
or .
( 1 ( 2
( P .
181