Acura MDX 2017 Owner's Manual page 106

Message
Appears if there is a problem with the Auto high-beam.
●
Appears when the Auto high-beam is in operation, or
●
the headlight switch is turned in AUTO, but there the
temperature inside the camera is too high. The Auto
high-beam cancels automatically.
Appears when the area around the camera is blocked
●
by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
May appear when driving in bad weather (rain, snow,
●
fog, etc.)
uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Condition Explanation
Manually operate the headlight switch.
●
If you are driving with the high-beam headlights when
●
this happens, the headlights are changed to low beams.
Use the climate control system to cool down the
●
camera.
Goes off - The camera has been cooled down. Turing
●
the headlight switch in AUTO can resume the system.
2 Front Sensor Camera P. 388
Have your vehicle checked by a dealer if the message
●
comes back on after you cleaned the area around the
camera.
Continued 105