On Timer - Sharp 21FL94 Operation Manual

Timer (Continued)
8
Press VOL (+) or (–) to change the STATUS setting.
ON DAILY
Status: ON
The ON TIMER is activated. The ON TIMER indicator will lights
up red to indicate ON TIMER is set.
Status: OFF
The ON TIMER will not operate. The ON TIMER indicator is off.
Status: DAILY
The ON TIMER is activated at the same time each day. The ON
TIMER indicator will lights up red to indicate ON TIMER is set.
9
Press MENU to exit.
Note:
• The ON TIMER cannot be set when the CLOCK is not set. In this
time, "PLEASE SET UP TIME" screen will appears for
approximately 2 seconds.
• Then CLOCK SET screen will appear. Repeat step 5 ~ 8 in "CLOCK
SET" steps. (Please refer to page
If you do nothing, the CLOCK SET screen will disappear.
• If the TV set is turned on by the On Timer, then the TV set will be
automatically turned off in two hours if no buttons are pressed on
the TV set or remote control.
21FL94_11-22_EN
OFF
VOL
;
–
13 on CLOCK SET.)
15
ON T I ME R
1 1 : 1 0 PM
S T A T US : ON
VOL
:
+
MENU
P L E AS E
S E T U P T
C L OC K S E T
– – : – –
22/3/04, 3:11 pm
Dimension: 140mm x 215mm
I ME
15