Use Of The Fridge - Electrolux ERO 2924 Instruction Book

Flaskhållare
Placera flaskorna (med öppningen framåt) på den
iordningställda hyllan.
Om hyllan är horisontalt placerad skall man endast
ställa stängda flaskor på den.
Denna flaskhylla kan lutas vilket gör det möjligt att
lagra redan öppnade flaskor.
För att luta hyllan skall man dra upp hyllan så att den
sedan kan roteras uppåt och placeras på den
ovanliggande nivån.
Luftcirkulation
Kylskåpet är utrustat med en speciell D.A.C.
fläkt (Dynamic Air Cooling) som aktiveras när
man slår på strömbrytaren (se fig. 1), och när
den gröna indikatorlampan är tänd betyder
detta att fläkten är i funktion.
Vi rekommenderar att man använder fläktens
(D.A.C.) funktion när rumstemperaturen
överskrider 25° C.
8
Downloaded from Fridge-Manual.com Manuals

Use of the fridge

Control Panel
A B C
A On/OFF light
B Fridge button ON/OFF
C Temperature setting button (warmest)
D Temperature indicator
E Temperature setting button (coldest)
F Super cooling light
G Super cooling button
Press (I) for the functioning of the whole
appliance .
Press (B) can function the fridge compartment
separately with the appliance in function.
A. Light ON/OFF
Fig. 1
B. Button ON/OFF
ON: Press the button (B). The pilot light (A)
BRYTARE
switches on.
OFF: Keep press the button (B) until the pilot light
(A) and the temperautre indicator switched off.
C - E. Temperature setting buttons
The temperature can be adjusted between +2°C and
+8°C.
By pressing the button (C or E), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (C). To set a colder temperature, press
button (E). The indicator display the newly selected
temperature for a few seconds and then shows
again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
D E F G
D. Temperature indicator
During normal functioning the indicator shows the
temperature inside the fridge.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment
F. Super cooling pilot light
G. Super cooling button
The maximum performance is obtained by setting
the supercooling function. It's recommended when
loading large quantities of food.
Press the supercooling button (G).The relevant pilot
light (F) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the supercooling function
switches off automatically.
Operation
Insert the plug in the power socket.
Press (I) for the functioning of the whole
appliance .
Press (B) can function the fridge compartment
separately but only with the appliance in
function.
The fridge is pre-set to run at +5°C. This
temperature will be reached in a few hours.
As soon as the appliance is switched on the
temperature indicator (D) shows the current
temperaure inside the fridge.
33