Operating The Climate Control Systems - Mercedes-Benz GLC Operator's Manual

Hide thumbs Also See for GLC:
Table of Contents

Advertisement

Switching cooling with air dehumidification on/off
General notes
If you deactivate the "Cooling with air-dehumidification" function, the air inside the vehicle will not
be cooled. The air inside the vehicle will also not be dehumidified. The windows can fog up more
quickly. Therefore, only deactivate the "Cooling with air-dehumidification" function briefly.
The "Cooling with air dehumidification" function is only available when the engine is running. The air
inside the vehicle is cooled and dehumidified according to the temperature selected.
Condensation may drip from the underside of the vehicle when it is in cooling mode. This is normal
and not a sign that there is a malfunction.
Activating/deactivating
Press the ¿ rocker switch up or down.
X
The indicator lamp above the rocker switch lights up or goes out.
Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp above
the ¿ rocker switch
remains off. The cooling
with air dehumidification
function cannot be acti-
vated via the multimedia
system any longer
(
page 273).
Y
Setting climate control to automatic
General notes
In automatic mode, the set temperature is main-
tained automatically at a constant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
During automatic controlling, the "Cooling with
air dehumidification" function is activated.
Automatic control
Turn the SmartKey to position 2 in the igni-
X
tion lock (
page 132).
Y
To activate: press the à rocker switch up
X
or down.
The indicator lamp above the à rocker
switch lights up.
Set the desired temperature using the w
X
rocker switch on the front control unit.

Operating the climate control systems

Possible causes/consequences and M Solutions
Cooling with air dehumidification has been deactivated due to a mal-
function.
Visit a qualified specialist workshop.
X
To switch to manual operation: press the
X
H rocker switch up or down.
or
Press the _ rocker switch up or down.
X
The indicator lamp above the à rocker
switch goes out.
In automatic mode, if you adjust the airflow or
air distribution manually, the indicator lamp
above the à rocker switch goes out. The
function which has not been changed manually,
however, continues to be controlled automati-
cally. When the manually set function switches
back to automatic mode, the indicator lamp
above rocker switch à lights up again.
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents