Remote Controller - JVC KW-V230BT Instruction Manual

REMOTE CONTROLLER

REMOTE CONTROLLER
To use the remote controller, purchase RM-RK258
separately.
You can also operate this unit from Smartphone
using JVC Remote APP. For details, visit <http://
www.jvc.net/cs/car/>.
(Only for KW-V230BT Region 2/KW-V235DBT/KW-V330BT) (Only for KW-V230BT Region 2/KW-V235DBT/KW-V330BT)
Preparation
❏ Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
❏ Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
V Warning:
• Do not ingest the battery, Chemical Burn
Hazard
The remote control supplied with this product
contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close
securely, stop using the product and keep it away
from children.
If you think batteries might have been swallowed
or placed inside any part of the body, seek
immediate medical attention.
V Caution:
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
ENGLISH 61