FujiFilm X100F Owner's Manual page 161

■ SHOE MOUNT FLASH
The following options are
available with optional
shoe-mounted fl ash units.
A
Flash control mode: The fl ash control mode selected with the
fl ash unit. This can in some cases be adjusted from the
camera; the options available vary with the fl ash.
• TTL: TTL mode. Adjust fl ash compensation (
• M: The fl ash fi res at the selected output regardless of sub-
ject brightness or camera settings. Output in some cases
can be adjusted from the camera (
• MULTI: Repeating fl ash. Compatible shoe-mounted fl ash
units will fi re multiple times with each shot.
• OFF: The fl ash does not fi re. Some fl ash units can be
turned off from the camera.
B
Flash compensation/output: The options available vary with
fl ash control mode.
• TTL: Adjust fl ash compensation (the full value may not
be applied if the limits of the fl ash control system are
exceeded). In the cases of the EF-X20, EF-20, and EF-42,
the selected value is added to the value selected with
the fl ash unit.
• M/MULTI: Adjust fl ash output (compatible units only).
Choose from values expressed as fractions of full pow-
er, from 1/1 (mode M) or 1/4 (MULTI) down to 1/512 in incre-
ments equivalent to 1/3 EV. The desired results may not
be achieved at low values if they exceed the limits of the
fl ash control system; take a test shot and check the results.
C
MODE
SHOE MOUNT FLASH
ADJUST END
B
).
B
).
D
E
Flash mode (TTL): Choose a fl ash mode for TTL fl ash control.
The options available vary with the shooting mode (P, S, A,
or M) selected.
E
• (FLASH AUTO): The fl ash fi res only as required; fl ash level
is adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway
indicates that the fl ash will fi re when the photo is taken.
F
• (STANDARD): The fl ash fi res with every shot if possible;
fl ash level is adjusted according to subject brightness.
The fl ash will not fi re if not fully charged when the shut-
ter is released.
G
• (SLOW SYNC.): Combine the fl ash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The fl ash will not fi re if not
fully charged when the shutter is released.
Sync: Control fl ash timing.
H
• (1ST CURTAIN): The fl ash fi res immediately after the
shutter opens (generally the best choice).
I
• (2ND CURTAIN): The fl ash fi res immediately before the
shutter closes.
Zoom: The angle of illumination (fl ash coverage) for units
that support fl ash zoom. Some units allow the adjustment
to be made from the camera. Select AUTO to automatically
match coverage to focal length when using optional con-
version lenses.
Optional Accessories
145