Boarding The Terminal - Vx820; Boarding With The Adyen App; Basic Functionality Vx820 - VeriFone VX820 User Manual

Plug the device into power supply.
Connect your Ethernet cable to the ETH port on the power cable.
Perform a device security inspection.
Only connect a regular Ethernet cable to the ETH port.
Using any other type of cable or another port (for example, the RS232 port) might severely damage
the device.

Boarding the terminal - VX820

Board the terminal only after successfully following the steps in Getting Started.

Boarding with the Adyen App.

Press + 9 to open the Admin menu.
1.
Choose Network config
2.
On the next screen, Choose
3.
Open the Adyen App on your mobile device.
4.
Tap Add New Device
5.
Choose WIFI .
6.
Enter the IP address of the terminal.
7.
Ensure the WiFi-connected mobile device is connected to the same local network as the VX820.
Tap Add device
8.
During the boarding process the terminal reboots. After the process is complete the terminal is ready to
9.
use.
See Basic Functionality

Basic functionality VX820

If the terminal shows an exclamation at the top bar, this means that the terminal holds data which it
failed to synchronise to Adyen platform due to lack of an outgoing internet connection.
Page 4 | © 2017 Adyen BV | Confidential
.
Network config
.
to begin the boarding process.
to get information on processing payments.
and make a note of the terminal's IP address.