LOW-/HIGH BEAM LIGHT BULB
•
Hold the electric connector «8» and unhook it from the bulb holder;
CAUTION
DO NOT PULL THE ELECTRICAL CABLES WHEN TAKING OUT THE BULB
ELECTRICAL CONNECTOR.
04_36
•
Remove the plastic gasket «9»;
•
Release the clip «10»;
•
Take out the bulb holder «11» and replace it with another one of the same
type;
04_37
TAIL LIGHT BULB
Hold the bulb holder «12» and take it out of its fitting;
CAUTION
DO NOT PULL THE ELECTRICAL CABLES WHEN TAKING OUT THE BULB
HOLDER.
04_38
84