HoMedics ag-3500TL Instruction Manual page 5

Instructions for Inversion
Massage Recliner Use
your inversion Massage recliner is designed to provide relaxation in
a variety of positions utilizing the easy lock levers on each side of the
armrests. The ideal position for optimum relaxation is one in which the
feet are above the heart.
NOTE: The Inversion Massage recliner design has a weight limit of
300 pounds. Persons exceeding this body weight should not use
this recliner.
• Before sitting in the Inversion Massage recliner, be sure it is in the
complete upright position by unlocking the levers and pulling the
backrest forward until it stops.
• Lock the recliner into the upright position by pulling the levers back
towards your head.
• Sit in the chair, and lean back slowly. Sitting all the way back in the
seat will make it easier to recline. To adjust the angle of the chair,
hold on to the armrests and lean back or forward until you reach the
desired position. lock the position into place by pulling the levers
back towards your head.
• The footrest may be raised by pulling it upward. Each position will
sound with a click. To lower the footrest, raise it until it stops and then
push it back towards the floor.
• Before getting out of the Inversion Massage recliner, be sure to return
it to its full upright position and lock into place.
• Stand up using the armrests for support.
Tip: To help you recline, slowly raise your hands above your head and
lean back. Lock in your desired position with the easy lock levers. To sit
upright, unlock the levers and move hands slowly towards your knees
while leaning slightly forward. This will bring the recliner back to its full
upright position.
Power adaptor Instructions
Connect the adaptor jack to the massage cushion's power receptacle
located along the right side of the cushion. once inserted, plug
the other end into an AC power outlet. Use only the AC power adaptor
provided with this unit.
aC Power adaptor Information
Your massage cushion is powered by an attached custom AC home
adaptor. use only the supplied ac home adaptor as other similar-
looking adaptors may cause irreparable damage to the unit and will void
your warranty.
8
Massage Cushion and
Hand Control Instructions
press the poWer button once to activate the hand controller.
A corresponding LED light will illuminate to indicate the power is ON.
to deactivate, press again.
Heat
Note:
to activate the heat function, you must first sit in the chair. once resting
Heat only
comfortably, turn on the massage function, then press the heat button once.
works with
The L.E.D. above the heat button will light indicating the heat is on.
massage
NOTE: When selecting the heat feature, there will be a slight decrease in the
function
strength of the massage output. This adjustment is normal and should not be
activated
interpreted as a defect.
Massage Strength
use this function to customize the intensity of your massage. the intensity
will increase with each press of the strength button providing three levels: low
(L), medium (M), high (H). To change the intensity from high to low, press the
button again.
Massage Speed
use this function to customize the speed of each massage cycle. the speed
will increase with each press of the speed button providing three levels as well;
low (L), medium (M), high (H). To change the speed from high to low, press the
button again.
Massage Styles and Target Zone Options
Choose from 8 massage functions. To activate, press the desired function
button. you can move from one style to another by simply depressing the
button of another style. you can further customize your massage by targeting
body zones and varying the speed and intensity within each style.
9