Set Alarm; Set Alarm Tone; Personal Settings; Change The Handset Name - Philips SE250 User Manual

5.11.3 Set Alarm

Press m in idle mode, scroll n to
CLOCK&ALARM and press o,
scroll n to ALARM and press o.
Scroll n to OFF, ON ONCE or
ON DAILY and press o.
If you select ON ONCE or ON
DAILY, enter the time (HH-MM)
for the alarm and press o to
confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.
Note
The alarm tone will sound for 1 minute
when the alarm time is reached. To mute
the alarm tone, simply press any key on
the handset.

5.11.4 Set Alarm Tone

Press m in idle mode, scroll n to
CLOCK&ALARM and press o,
scroll n to ALARM TONE and
press o.
Scroll n to MELODY 1,
MELODY 2 or MELODY 3 and
press o to confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.

Personal settings

6 Personal settings
6.1

Change the Handset Name

You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is PHILIPS.
Press m in idle mode, scroll n to
PERSONAL SET and press o,
and then press o again to enter
HANDSET NAME.
The handset name is displayed.
Press c to delete the characters
one by one. Or long press to delete
all.
Enter the new name (maximum 10
characters) and press o to
confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.
6.2

Handset Tones

6.2.1 Set the Ring Volume

Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
There are 6 ringer volume options (Level
1 to Level 5 and RINGER OFF). The
default level is 3.
27