Installing The Handset; Inserting/Replacing Batteries; Telephone Connection - Philips Kala 200 User Manual

Inserting/Replacing batteries

Your handset is powered by two rechargeable AA/R6 batteries.
Only AA 600 mAh rechargeable batteries should be used as replacements.
1. Slide down the cover
on the back of the telephone.
1
2
3. Close the cover.
The handset automatically switches to subscription mode.
Registering your additional KALA 200 handset with the base station
1. Unplug the electricity supply lead underneath the base station, then
plug it back again.
2. Select the additional handset setting icon (see Page 5, for instructions
on how to select a programming icon). You will hear an invitation
beep.
3. Enter your RC code (shown on the label underneath the base
station). Press
4. Your handset will then search for the base station. When the base
station is detected, you will hear a validation beep. Otherwise, an
error beep will be heard.

Telephone connection

On the bottom of the charger, connect the power supply
then plug the power adaptor into the easily accessible
wall socket.
Only use the power cable supplied with the telephone.
Place the handset on the charger.
On first use or when new batteries have been inserted,
charge the batteries for at least 24 hours.
Telephone range
The "area symbol" on the display indicates that the
handset is registered on the base station.
2

INSTALLING THE HANDSET

Never use non rechargeable batteries.
to validate.
2. Insert batteries following the diagram.
+
+
-
-