Table of Contents
Advertisement
Figure 33. 3494 Lxx Frame - Operator Panel with Convenience I/O Station Feature
Library Manager
The Library Manager display 1 (see Figure 35 on page 51 or Figure 34 on page
51) and keyboard (with its pointing device) 2 are located in the rear of the L
Frame. The Library Manager is used to perform system administrator activities and
advanced operator activities.
For units shipped after October 29, 2004, the Library Manager display and
keyboard appear as shown in Figure 34 on page 51. The display consists of a color
flat- panel monitor. The brightness and contrast controls for the Library display are
located on the lower left portion of the of the monitor's bezel.
For units shipped before October 29, 2004, the Library Manager display and
keyboard appear as shown in Figure 35 on page 51. The display is similar to the
later version but the monitor is smaller and monochrome. The brightness and
contrast controls for the display are located on the back of the monitor.
For both types of display, an optional Remote Library Manager Console feature is
also available for installing in a remote location in a LAN environment.
The Library Manager display is shut off by the operating system software when
there has been no activity by the operator. This "snooze" function is provided to
conserve power and increase the reliability of the display hardware. If the 3494
Tape Library is powered on and the display is off, you can press any key on the
keyboard to activate the display.
50
3494 Tape Library Operator Guide
5 Convenience I/O Station Operation Tab
The convenience I/O station operation tab is used to open the convenience
I/O station door when the door is unlocked (when the I/O Locked status
LED is not lit).
Advertisement
Table of Contents
