Table of Contents
Advertisement
53
'o record, press
OJ.
)nee BUSY disappears from the display, verify that the program has recorded
orrectly as follows:
. Rewind the tape to the beginning of the program
.
. Press the OUT button on the calculator .
. Press the[}]
key (verify) .
. Press PLAY on the cassette tape recorder.
'or more details on saving and
verification,
see the CE-126P instruction
1anual.
PRESS
2:VERIFY
:SAVE
PRESS
'ress
OJ
key: start recording
'ress
[}]
key: verify contents stored in memory of the calculator and contents
of memo recorded on the tape
NOTE: •When you wantto record,
verify,
or transfer all contents of a RAM
card,
slide the operation mode switch to
COMP/PRO.
Then follow the
same procedure given above.
•When you wantto
record,
verify, or transfer a program written in
BASIC,
slide the operation mode switch to COMP/PRO and follow
the procedure given
above.
These operations can also be performed
using the BASIC commands CSA VE and CLOAD.
• For more details on cassette transfer, see the CE-126P instruction
manual.
Jsing a pointed object such as a ball-point pen, press the OUT button (see
llustration above) and the display appears as follows:
During
transfer,
the existing contents of the RAM card are erased and are
replaced by the contents of the cassette
tape.
=>ress RECORD on the cassette tape recorder.
~~~~~~~~~~D
0000
1
D
00001
1
~~D
Transferring contents to calculator from cassette tape
To transfer the contents of a cassette tape holding a program or memo recorded
earlier, slide the operation mode switch to either MEMO/READ or
MEMO/WRITE and press the mode key of the category for which the transfer is
to be made (either
[]IT],
I
SCDL
I ,
or
I
NOTE
I).
Using a pointed object such as a ball-point pen, press the IN button (see
illustration) of the
calculator,
then the PLAY button of the recorder to begin the
transfer
operation.
,aving contents to cassette tape from calculator
:;onnect the cassette tape recorder to the calculator in accordance with the
operatinq manual supplied with the interface.
Io
record the contents of a
memo,
slide the operation mode switch to either
111 EMO/READ or MEMO/WRITE, then press the mode key of the memo category
/ou want to record (either
[]IT],
I
SCDL
I
,
or
I
NOTE
I )
.
set a cassette tape in the cassette tape recorder. Make sure the cassette tape is
ieyond
the clear leader, to make actual recording tape.
CHAPTER 10 MAINTENANCE AND PERIPHERAL DEVICES
CHAPTER 10 MAINTENANCE AND PERIPHERAL DEVICES
;2
Advertisement
Table of Contents
