Table of Contents
Advertisement
'
Amount
depends on memory remaining in your calculator.
IUD
MEMORY
REMAINING
Checking Memory Capacity
If you want
to see how much more room you have in the telephone listing
t
n
mory press
If
a
key other than "Y" is pressed after
[QKJ,
the deletion is cancelled.
I
T~EPHONE
NAME
?
I -:
ID!I
TELEPHONE-OK
TO
DELETE
ALL?
Y/N
Yo~ are
then asked to verify that you want to delete all telephone listings
lndrcate "yes" by pressing
·
1T~EPHONE
NAME
?
lfil]
With the operation switch in the MEMO/WRITE
position,
press
[Th]
Example: To delete all listings in the Tel Memo directory.
/Trr_EPHONE
NAME
?
!he
~isplay wil_l ask you to verify that you want to delete the listing. Indicate
yes
by pressing
ID!I
FITZGERALD,
Be I
DELETE
OK?
Y/N
Then press
17
CHAPTER 4 TELEPHONE MEMO MODE
With the operation switch in the MEMO/WRITE position, locate the listing for
Belinda Fitzgerald.
Example: Belinda Fitzgerald's listing is to be deleted.
Deleting Information
When you want to erase an old listing, use the
[QIT]
key.
Hint: If you want to enter a completely new number, after going to the
"number"
portion of the display as we did above, press~
key. The display then
asks for the new
number.
Pressing ~while
in the "name" portion of
the display does not have the same effect.
Instead,
the calculator thinks
you want to enter a new name and
number.
The old listing itself remains
unchanged.
Slide the operation mode switch to MEMO/WRITE.
Locate George Wake man's listing by either of the two search
methods.
The display shows the "name" part of the listing. To let the calculator know you
want to make a listing
change,
make the cursor appear in the display by
pressing
[El.
Now press the
I
ENTER
I
key to put you in the "number" part of
Wake man's current listing. Now move the cursor to the first number to be
changed using
[EJ.
After you make the
changes,
again press the
I
ENTER
I .
This registers the new
number in the
memory.
The
"name"
part of the entry remains unchanged.
Correcting Entries
Example:
To change George Wakeman's telephone number to 201-265-0000.
An arrow appearing on the top right/left corner of the screen means that there is
.
more input data which cannot be seen in upper/lower half portion in addition to
the displayed data. To display that, press
[El
or~.
•When the first input data in sequential order is to be displayed, press
l
.
/"-_I
key
after pressing ~key.
•If MEMO/READ is set when the power is turned on, the first data stored in
alphabetical order appears.
•If there is more than one "FIT" in the stored
data,
press
I
SRCH
I
until you reach
the one you want.
CHAPTER 4 TELEPHONE MEMO MODE
16
Advertisement
Table of Contents
