Setting Up The Monitor; Installation - Philips 243S7 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
比例
Power
* DP
(2X3S7EYMB)
*Audio
*Different according to region
223S7
243S7
使用 前请阅读使用说明
User's Manual
保留备用 Monitor drivers
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license from Koninklijke
Philips N.V.
* CD
* VGA
* HDMI
(2X3S7EHMB)
5
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the
VESA mount area.
(2) Use a screwdriver to tighten the
assembly screws, and secure the
stand to the
(3) Gently attach the base to the
stand.
(4) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
1
monitor tightly.
2
4
3