Remove The Base Assembly For Vesa Mounting - Philips 243S7 User Manual

2. Setting up the monitor
Height adjustment
Pivot
130mm
0
90
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any
possible damage or injury.
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
3. Loosen the assembly screws, then
detach the neck from the monitor.
9
1
2