Chapter 1 - Important Safety Information; Technical Handbook - Honeywell Touchpoint Plus Technical Handbook

MAN0984_Iss 2_06/15
Chapter 1 – Important Safety Information
The Equipment referred to in this manual contains components and assemblies that are each certified for use
in a variety of differing environments, and it is the site owner's responsibility to confirm the suitability of the
equipment prior to its installation and use.
The Equipment assemblies referred to in this manual are collectively certified for use in a flammable gas
detection system only. Any other use is not currently certified and is not authorised by the manufacturer.
Please check the product rating plate and look for the following marks to ensure that the supplied equipment
is suitable for its intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the Honeywell
product specific EC Declaration of Conformity.
Products bearing the UL mark conform to the requirements for Ordinary Locations. The letters C and US
mean that the product is certified for use in Canada and the United States of America.
FOR SAFETY REASONS THIS EQUIPMENT MUST BE OPERATED BY QUALIFIED PERSONNEL
ONLY. READ AND UNDERSTAND THE INSTRUCTION MANUAL COMPLETELY BEFORE
OPERATING OR SERVICING THE EQUIPMENT.
POUR DES RAISONS DE SÉCURITÉ, CET ÉQUIPEMENT DOIT ÊTRE UTILISÉ, ENTRETENU ET
RÉPARÉ UNIQUEMENT PAR UN PERSONNEL QUALIFIÉ. ÉTUDIER LE MANUEL D'INSTRUCTIONS
EN ENTIER AVANT D'UTILISER, D'ENTRETENIR OU DE RÉPARER L'ÉQUIPEMENT.
Important Safety Information
WARNING
ATTENTION
1
Touchpoint Plus

Technical Handbook