Philips 655 CT6558 Service Manual page 31

Depart. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
8.4.3 W@P Parameter settings (to be checked using the Operator Simcard)
GSM Settings
GSM settings consist in many parameters :
Phone number parameter:
This parameter is the phone number required to perform a data transmission to the Internet Service
Provider (ISP) and given by the operator. ISP use either analogue or numeric interfaces to connect to the
subscriber. If the operator uses a digital interface but the phone number is set in the analogue area of the phone,
data connection will fail (and vice versa).
Login parameter:
This parameter is provided by the operator.
Password parameter:
This parameter is provided by the operator.
Gateway parameter (IP):
An IP address is used to recognize computers connected to a network. It is made up of 4 * 3 digits (8 bits) and
separated by points. Each computer has its own IP address. For W@P application, IP address is used to access the gateway.
This parameter is provided by the operator.
Inactivity time:
This parameters allows you to manage an inactivity time period after which the phone automatically ends
up the w@p session and returns to idle mode screen.
GPRS Settings
GPRS settings consist in many parameters:
 PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
COMPANY RESTRICTED
VY-V-640-P655
Page : 31 of 74
Langue : EN
Date : 03/01/05
VY-V-640-P655