Table of Contents
Advertisement
User Manual BDH5031V
8.2
CHECKING THE CURRENT INPUT SIGNAL
• Press the [RECALL] button on the remote control, then displays basic
informations of the current input signal, Under this state, pressing the
[RECALL] button once more, additional informations about the current
input signal will be displayed on the OSD.
• Used to check the INPUT signal mode, current time, resolution, etc.
1. Press the "RECALL" Button.
Component
• Press the "RECALL" button on the Remote Control.
PM 12:00
H:1920
V:1080
1. If you watch Component, PC, or HDMI:
Component
PM 12:00
H:1920
V:1080
2. If you watch VCR image:
AV1
PM 12:00
Video PAL B/G
Notes:
1) "1920 x 1080" displayed in the INPUT signal is not the resolution of the
set, but the signal that is sent by the Digital Broadcasting Receiver.
RETURN TO THE CONTENTS
Displays which input terminal is used, and indicates the input signal mode.
Indicates the mode and current time.
Indicates the horizontal and vertical resolution of the current
input signal
Displays the program number and input terminal, which is used.
Indicates the mode and current time.
Displays the video system of input signal
RECALL
Advertisement
Table of Contents
