Watching Two Pictures Simultaneously - Philips BDH5031V.00 User Manual

User Manual BDH5031V
P.MODE PICTURE FMT
S.MODE S.EFFECT PIXEL SHIFT
PIP POSITION COLOR TEMP
PIP SOURCE SWAP
MENU
PIP
VOL
Main Main
Sub
<Using 'Position' button>
TIMER STILL
Main
Sub
R-48F01
Sub
Main
<Using "/" and "/" button>
Sub
6.5
• PIP (Picture-in-Picture) and P-by-P (Picture-by-Picture) modes allow
AV
users to watch two pictures simultaneously.
Screen Adjustment of the Sub-picture
• Alpha Blend of the sub-picture can be adjusted on Screen Menu of
OSD.
• Alpha Blend is only available in PIP mode.
RECALL
Alpha Blend - The adjustment of alpha blend allows the subpicture to
be translucent. The translucent rate is controlled with "/" buttons.
1. Engaging PIP mode.
P by P
• Press the 'PIP' button once on the remote control to engage the Pic-
VOL
Main Sub
ture-in-Picture mode.
• By pressing the button repeatedly, it will show the following cycle.
• If switched to P-by-P (Picture-by-Picture) mode, the screen will be split
in half. The screen on the left side is the main picture, and the sub-pic-
ture will be on the right of the screen.
2. Position of the Sub-picture.
MUTE
Main
• When PIP mode is engaged, the sub-picture can be displayed in one
of the four corners by using ‚POSITION' button.
Sub
• Whenever pressing the button, the sub-picture will be cycling in the
following order.
• If you would like to move the sub-picture to specific position you de-
Sub
sire, use navigation keys.
Main
3. Swap the pictures.
• In order to swap between the main picture and sub-picture, press the
'SWAP' button.
RETURN TO THE CONTENTS

WATCHING TWO PICTURES SIMULTANEOUSLY