Advertisement
Register Tab:
o
Changes from Default settings:
1- Register abilty==
2-
Unregister ability when port INS=
NAT Tab:
o
Same as default
Calling Party tab:
o
Changes from Default settings:
1- P-asserted Identity Header =
Called party Tab:
o
Same as default
Voice/Fax Tab:
o
Changes from Default settings:
1- IP Codec priority (1st = G.729A, 2nd= G.711u, 3
RTP/RTCP Tab:
o
Same as default
T.38, T.38 Option
o
Same as default
DSP
o
Same as default
Supplementry services:
o
Changes from Default settings:
1- CNIP (Receive) =
Additional DID's
Please set the channel attribute for number of ports depending on the number of
active SIP lines
as"additonal channel for channel
For example ,if there are 3 Simultaneous calls can be received on this trunk, the
number of V-SIPGW ports to be set as
6/19/2012
Version1
Enable
Disable
Enable
Yes
an"additonal channel for channel
rd
=None)
1"
1"will be
2
ports
11
Advertisement
