My Device Does Not Appear As Either A Portable Device Or A Removable Drive Or Volume On My Computer; My Phone Will Not Connect To The Device - Garmin 50LM Owner's Manual

portable device on my computer
On Mac computers and some Windows
computers, the device connects using USB
mass storage mode. In USB mass storage
mode, the device appears as a removable
drive or volume, and not as a portable device.
Windows versions prior to Windows XP
Service Pack 3 use USB mass storage mode.
My device does not appear as either
a portable device or a removable
drive or volume on my computer
1 Disconnect the USB cable from your
computer.
2 Turn off the device.
3 Connect the USB cable to your device and
to a USB port on your computer.
TIP: The USB cable must connect to a USB
port on your computer, not to a USB hub.
The device turns on automatically and goes
78
into MTP mode or USB mass storage mode.
A picture of the device connected to a
computer appears on the device screen.
NOTE: If you have several network drives
mapped on your computer, Windows may
have trouble assigning drive letters to
your Garmin drives. For information about
assigning drive letters, see the help file for
your operating system.
My phone will not connect to the
device
• Select Settings > Bluetooth.
The Bluetooth field must be set to Enabled.
• Enable Bluetooth wireless technology on
your phone and bring your phone within
33 ft. (10 m) of the device.
• Go to Garmin.com/bluetooth
help.
for more
Garmin DriveSmart™ 50LM