Cloning Connections/Teaching Setup - LG 32LG700H Owner's Manual

COMMERCIAL MODE SETUP

CLONING CONNECTIONS/TEACHING SETUP

Teaching the Master Setup to Another TV
Connections for the LT2002 to Teach another TV the Master Setup
Antenna
or CATV
!
NOTE
If an analog channel is not available, tune TV to an Aux source like AV-1 for cloning purposes.
G G
Teach Master TV's Setup to
the target TV
After learning is complete, remove the M.P.I. cable from the mas-
ter TV and connect it to the target TV that you want to copy
the master TV's setup into. With "THE CLONE HAS CONTROL
OF TV" message displayed, press 2 or use either Channel key to
go to the "TEACH TO TV" option, press ON/OFF, POWER, or
ENTER. Select the LT2002 memory that the new setup is in.
Press On/Off to transfer the new setup and other information to
the new TV. Teaching usually takes 2-3 minutes.
After the "TEACHING COMPLETE" message is displayed, press
any key to return to the Clone menu, then press ON/OFF,
POWER, or ENTER. If finished, detach M.P.I. cable from the
target, newly-cloned TV.
Disconnect TV Power for 15 Seconds
Unplug the AC power cord of the newly-cloned TV from the
power outlet for about 15 seconds to activate the newly-copied
setup.
94
THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION XX
THE TV IS VERSION XX
THE SW IS REVISION XX
CLONE CLOCK = XX:XX
TV CLOCK = XX:XX
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
Target TV
Ferrite Core
Connect cable to
(TDK, ZCAT TV MPI Jack and
follow on screen
instructions
2035-0930)
QuickSet II Programmer
Clone Programmer
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
-TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
This menu should appear
after any key is pressed
on the Installer remote.
TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear
during Teaching function.
TEACHING COMPLETE
This display will appear
after Teaching is complete.
Status
Indicator
MPI
Reset
Color
• green battery ok
• red battery low
Blink pattern
• slow power on
no communications
• heartbeat power on
communications ok
LT2002