Table of Contents
Advertisement
SImple show playback
Player mode is designed for users with no intelligent lighting experience to select
and play a show from those saved on the memory card. No access to recording or
configuration functions is available in this mode. This mode is described in "Player
mode" on page 27.
Schedule shows
Scheduler mode is used for playing back shows according to a schedules developed
using the PC-based LightCorder Scheduler program. Scheduling is described in
"Scheduling" on page 29.
Moni tor DMX
Pure DMX monitor mode restricts the LightCorder to display DMX information in
real time and is a useful test tool. This mode is described in "Pure DMX monitor
mode" on page 34.
Real time backup to a DMX control system
Fail-safe mode enables the LightCorder to be used as a real-time back-up system if
your DMX controller fails. In this case the LightCorder will start running its default
show until DMX input form the controller is restored. This mode is described in
"Fail-Safe mode" on page 36.
Control via a computer
RS-232 command mode can be used to send instructions from a computer or
computer-based control system (such as the Martin ProScenium) to the
LightCorder. This mode is described in "RS-232 command mode" on page 37.
S A F E T Y P R E C A U T I O N S
• The LightCorder is NOT for household use.
• For protection against fire and electrical shock, ensure that the fixture is properly
grounded (earthed), and do not expose it to rain or moisture.
• Use only a source of AC power that complies with local building and electrical
codes and has both overload and ground-fault protection.
• Refer all service to a qualified technician.
6
Introduction
Advertisement
Table of Contents
