Kenwood KDC-152 Service Manual page 9

(2) Remove the shaft from the TM base. (See Fig.7)
(3) Disengage the hook on the pickup from the TM base. (See
Fig.7)
3.2.4 Removing the Spindle motor (See Fig.8. 9)
(1) Remove the HC CL. Spring from the HC CL. base and the
TM base, and then lift up the HC CL. base. (See Fig.8)
shaft
Fig.7
HC CL. spring
[ SIDE VIEW ]
Fig.8
(No.WA001<Rev.001>)9/18
(2) Remove the HC CL. base from the holes on the TM base.
(See Fig.9)
Fig.9
(3) Remove the two screws D attaching the spindle motor.
(See Fig.10)
D
Fig.10