Bluetooth — Mobile Phone; Connect With A Remote Device By One-Touch (Nfc); Receive A Call - Kenwood KMM-BT518HD Instruction Manual

BLUETOOTH®

Connect with a remote device by One-touch (NFC)

(for /
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices such as
smartphones.
By holding an NFC-compatible remote device near to the
N-Mark on the unit (volume knob), the unit and remote device
proceed to complete pairing and established the BLUETOOTH
connection automatically.
1
Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for
more information.
2
Hold the remote device near to the N-Mark on the unit
(volume knob).
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark on
the unit (volume knob) again.
• This unit only can recognize and connect to one NFC-
compatible device at a time.
18 ENGLISH
BLUETOOTH — Mobile phone
)
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time.
During a call:
• ZONE 1 illuminates according to the settings made for [DISPLAY] ( 27) and ZONE
• If you turn off the unit or detach the faceplate, the Bluetooth connection is
The following operations may differ or not available depending on the connected
phone.
First incoming call...

Receive a call

( 19)
2 illuminates in green color.
disconnected.
To On the faceplate
Answer a call
Press
or one of the number buttons
(1 to 6).
Reject a call
Press
End a call
Press
On the remote control
or the volume knob Press
Press
.
Press
.
.
.
.