Part
Door Removal
12 _ Removal and Reassembly
figure
1. Door Opening.
2. Remove 2 Screws from the Frame panel.
3. Separate the temporary fixation part of the
4. Remove 15 screws from the Holder Glass.
5. Remove the Door cover.
6. Remove 8 screws from the Support-Hinge.
7. Remove the Support-Hinge, Hinge.
8. Remove the Door Seal, and the Glass.
Description
assembly door.
A. Be careful not to scratch the door cover.
B. Be careful of the damage to the door glass.
C. Check the door seal condition after the
assembly.