Philips 190x5 User Manual page 50

Troubleshooting
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
LightFrame
For further assistance, refer to the
Philips distributor.
file:///D|/My%20Documents/dfu/X_model/english/190x5/safety/saf_troub.htm (3 of 3)2005-04-21 8:41:33 AM
TM
doesn't work
Consumer Information Centers
RETURN TO TOP OF THE PAGE
This is characteristic of liquid crystal and
is not caused by a malfunction or
deterioration of the liquid crystal. The
after-image will disappear after a peroid
of time.
The remaining dots are normal
characteristic of the liquid crystal used in
today's technology.
Press the Auto button.
TM
Activate the LightFrame
list and contact your local
software again.