Page 1: Table Of Contents
170X6FB/00 Service 170X6FB/93 170X6FW/00 Service 170X6FW/93 190X6FB/00 Service 190X6/FB/93 Description Page Description Page Scaler Diagram/C.B.A---------------------------40~46 Important Safety Notice------------------------------- 2 Audio Diagram/C.B.A---------------------------47~54 Technical Data/Installation------------------------3~6 Power Diagram/C.B.A---------------------------55~57 On-Screen Display/Aging Mode--------------------7~9 USB Diagram/C.B.A-----------------------------58~60 Factory Mode/Pixel defect policy---------------10~11 Control&Earphone Diagram/C.B.A-------------61~63 Mechanical instructions--------------------------12~13 Exploded View---------------------------------- 64~65...
Page 2: Important Safety Notice
TO ENSURE THE CONTINUED RELIABILITY OF THIS Company** Equipment. The service procedures PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S recommended by Philips and described in this service REPLACEMENT PARTS, WHICH ARE LISTED WITH manual are effective methods of performing service THEIR PART NUMBERS IN THE PARTS LIST SECTION operations.
Page 3: Technical Data/Installation
Technical Data(For 190X6) 190X6&170X6 LCD Go to cover page 1. General 2). Intel DVI Digital 1.1 Product description " 190X6 is the 6th generation of Hudson 19 TFT Flat Panel Display Input signal: Four channel TMDS signals Monitor. The monitor featured with both DVI-D and analog signal Signal source: pattern generator format as the SPEC Input interface, and modularized as a display unit with embedded 1.2.6 Audio...
Page 4 Technical Data(For 170X6) 190X6&170X6 LCD Go to cover page 2). Intel DVI Digital Input signal: Four channel TMDS signals General Signal source: pattern generator format as the spec Product description " 1.2.6 Audio Amplifier and headphone section : 170X6 is the 6th generation of Hudson 17 TFT Flat Panel Display Output power: 2 x 2Wrms into 16 Ohm Monitor.
Page 5: Connection To Pc
Connection to PC 190X6&170X6 LCD Go to cover page Rear View Front view 1.USB upstream port 2.VGA input 3.DVI-D input 4.AC power input 5.PC audio input 6.Kensington anti-thief lock Connecting to your PC If you use an Apple Macintosh, you need to connect the special Mac adapter to one end of the monitor signal cable.
Page 6 Connection to PC 190X6&170X6 LCD Go to cover page Connect to PC Turn off your computer and unplug its power cable. Connect the monitor signal cable to the video connector on the back of your computer Plug the power cord of your computer and your monitor into a nearby outlet USB plug Connect USB upstream port on monitor and the USB port on PC with a USB cable.
Page 7: On-Screen Display/Aging Mode
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
Page 8 On Screen Display 190X6&170X6 LCD Go to cover page...
Page 9 190X6&170X6 LCD Go to cover page CANNOT DISPLAY THIS VIDEO MODE.. Front Control Panel This screen warns when the input frequency from the computer is not a standard video mode or out of the monitor's scanning range. Please change the display mode of the operating software in the com- puter(i.e.windows) to 1280*1024@60HZ for best display results.
Page 10: Factory Mode/Pixel Defect Policy
ANG1 : For analog only project control (0:Dual, 1:Analog only) IDX : Limit current of inverter, 170X6: 200, 190X6: 245 SCALER : Read/Write scaler register NVRAM : Read/Write eeprom address Panel : LG (LG.Philips panel) Access Factory Mode How to get into Factory Mode Menu Step1: Turn off monitor.
Page 11 Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
Page 12: Mechanical Instructions
Mechanical Instructions 190X6&170X6 LCD Go to cover page Front View Step 2: Unscrew 3 screws as shown in Fig. 4. Fig. 1 Fig. 4 Back View Step 3: -Unscrew the four screws as shown in Fig. 5. - Remove the base. Fig.
Page 13: Mechanical Instructions
Mechanical Instructions 190X6&170X6 LCD Go to cover page Step 7: Unscrew 9 screws as shown in Fig. 11. Disconnect 7 connectors as shown in Fig. 11. =======> Fig. 8 LIPS(T50P054.00) SCALER ASSY Step 5: Remove the Back Cover Assy -Remove the Control Board from the Back Cover Assy -Unscrew 7 screws as shown in Fig.
Page 14: Display Adjustment/Trouble Shooting
Display Adjustment 190X6&170X6 LCD Go to cover page Alignment procedure 1. Turn on the LCD monitor. Clear image Clear image 2.Turn on the Timing/pattern generator. See Fig.1 Resolution :1280x1024(Use the best resolution) Timing : H= 31.47KHz V=60Hz 3. Preset LCD color Analyzer CA-110 -Remove the lens protective cover of probe CA-A30.
Page 15: Trouble Shooting
Trouble Shooting 190X6&170X6 LCD Go to cover page Common Problems Having this problem Check these items · No Picture Make sure the power cord is plugged into the (Power LED not lit) power outlet and into the back of the monitor. ·...
Page 16 The remaining dots are normal characteristic of the liquid crystal used in today’ s technology · LightFrame doesn't work Press the Auto button. · Activate the LightFrame software again. For further assistance, refer to the Consumer Information Centers list and contact your local Philips distributor...
Page 17: Warning Message
Warning message 190X6&170X6 LCD Go to cover page Item Attention Signals Display Time Condition Attention off Can not display this 30 mins This warning appears when the video mode, change input signal from your computer computer display input is not in a standard video mode to 1280x1024@60Hz or is out of the monitor s scanning range.
Page 18 Warning Message 190X6&170X6 LCD Go to cover page OSD MAIN CONTROLS 3 secs This message will appear 3 UNLOCKED seconds to indicate the OSD MAIN CONTROLS status when to un-lock it by pressing " " MENU(OK) button for more than 10 seconds while there is video input from THIS IS 85HZ 10 mins...
Page 19: Electrical Instructions
Electrical instructions(190X6) 190X6&170X6 LCD Go to cover page 1. General points 14 1024X768 48.4K 65 60Hz 1.1 During the test and measuring, supply a distortion free AC mains 15 1024X768 56.5K 75 70Hz voltage to the apparatus via an isolated transformer with low internal 16 1024X768 60.0K 78.75 75Hz...
Page 20 Electrical instructions(190X6) 190X6&170X6 LCD Go to cover page Auto color adjustment (B) Apply a 640x480/31kHz/60Hz signal with 16 gray pattern, set brightness to 100%,and contrast to 50%. Adjust the R. G. B offset, and gain to calibrate the color smoothly and 64-gray level distinguishable. Check all pre-setting 34 modes.
Page 21 Electrical instructions(170X6) 190X6&170X6 LCD Go to cover page 1. General points 14 1024X768 48.4K 65 60Hz 1.1 During the test and measuring, supply a distortion free AC mains voltage to the apparatus via an isolated transformer with low internal 15 1024X768 56.5K 75 70Hz resistance.
Page 22 Electrical instructions(170X6) 190X6&170X6 LCD Go to cover page 4.3 Adjustment of WHITE-D (B) Apply a 1280*1024 / 60Hz signal with white pattern, set brightness to 100%, and contrast to 50%. Adjust the R, G, B Sub-Gain, for the screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall be; 9300°K 6500°K 0.283 ±...
Page 23: Lightframedr
First things first: Philips LightFrame DR only works with monitors specially built to use this software. Earlier Philips monitors or other manufacturers' monitors will not work with this special software. This software is only for use with Philips 170X6,170P6 and 190X6,190P6 monitors .
Page 24 Traditional Chinese and Korean are supported. LightFrame will detect the language of computer system OS and select the language automatically. Notes Philips LightFrame DR only works with monitors specially built to use this software. If LightFrame DR detects that your monitor is not...
Page 25: Ddc Instructions/Data
DDC Instructions 190X6&170X6 LCD Go to cover page General Pin Assignment The digital only connector contains 24 signal contacts organized in DDC Data Re-programming three rows of eight contacts. Signal pin assignments are listed in the In case the DDC data memory IC or main EEPROM which storage all following table: factory settings were replaced due to a defect, the serial numbers have to be re-programmed"...
Page 26 DDC Instructions 190X6&170X6 LCD Go to cover page Configuration and procedure 3. At the submenu, type the letter of your computer's hard disk drive followed by :EDID45 (for example, C:\EDID45, as shown in Fig. 7). There are 3 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
Page 27 DDC Instructions 190X6&170X6 LCD Go to cover page Re-programming Analog DDC IC Step 3: Modify DDC data (verify EDID version, week, year) Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
Page 28 DDC Instructions 190X6&170X6 LCD Go to cover page Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Digital DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
Page 29 DDC Instructions 190X6&170X6 LCD Go to cover page Step : 8 Modify serial number in OSD Step 5: Write DDC data -1. Unzip the serial number.zip to your computer, then open the folder 1. Configuration should be as Fig. 24. And press OK. as shown in Fig.28.
Page 30 : Detailed timing block 1 Serial Number TY 123456 Color Characteristics Monitor Descriptor #3 Red X coordinate : 0.636 Monitor Name : Philips 190X Red Y coordinate : 0.348 Monitor Descriptor #4 Green X coordinate : 0.292 Monitor Range Limits Green Y coordinate : 0.618...
Page 31 Serial Number TY 123456 Green X coordinate : 0.292 Monitor Descriptor #3 Green Y coordinate : 0.618 Monitor Name : Philips 190X Blue X coordinate : 0.142 Monitor Descriptor #4 Blue Y coordinate : 0.072 Monitor Range Limits White X coordinate : 0.313...
Page 32 Serial Number TY 123456 Preferred Timing Mode : Detailed timing block 1 Monitor Descriptor #3 Color Characteristics Monitor Name : Philips 170X Red X coordinate : 0.641 Monitor Descriptor #4 Red Y coordinate : 0.342 Monitor Range Limits Green X coordinate : 0.292...
Page 33 : Detailed timing block 1 Serial Number : TY 123456 Color Characteristics Monitor Descriptor #3 Red X coordinate : 0.641 Monitor Name : Philips 170X Red Y coordinate : 0.342 Monitor Descriptor #4 Green X coordinate : 0.292 Monitor Range Limits Green Y coordinate : 0.611...
Page 34: Isp Instructions
ISP CABLE FOR CPU 190X6&170X6 LCD Go to cover page Go to cover page Configuration and procedure ISP ( In System Program) software is provided by Genesis to upgrade the firmware of CPU. ISP cable is for the interface between "Parallel port of PC" and "15 pin-D-SUB connector of monitor.
Page 35 ISP CABLE FOR CPU 190X6&170X6 LCD Go to cover page Update the firmware Double click the Gprobe 4 icon on the desktop ,then appears window as shown in Fig.5 Press the options then choose configure Pin as shown in Fig.5 From the menu that appears, choose the number 17 in "output pin"...
Page 36 ISP CABLE for CPU 190X6&170X6 LCD Go to cover page Go to cover page Fig.11 click "OPEN" Shut off the AC power Click the "OK" button and then connect the AC power, after the follow window appears, the update is completed. The isp instructions between 170X6 and 190X6 is the same except the hex code...
Page 37: Wiring Diagram
Wiring Diagram(170X6) 190X6&170X6 LCD Go to cover page...
Page 38 Wiring Diagram(190X6) 190X6&170X6 LCD Go to cover page Go to cover page...
Page 39: Block Diagram
190X6&170X6 LCD Block Diagram Upstream Backlight From PC Panel Backlight USB UP USB Down 5Pin LVDS Interface Downstream to USB Device Power Earphone Scaler 11Pin Board 4Pin Power Inverter GM5321LF Audio & Audio & Board Audio & Control ControlBoard Pacific1SC 13Pin Control 13Pin...
Page 40: Scaler Diagram/C.b
40 190X6&170X6 LCD Scaler Diagram Go to cover page...
Page 41 190X6&170X6 LCD Scaler Diagram...
Page 42 42 190X6&170X6 LCD Scaler Diagram Go to cover page...
Page 43 190X6&170X6 LCD Scaler Diagram...
Page 44 44 190X6&170X6 LCD Scaler Diagram Go to cover page...
Page 45 190X6&170X6 LCD Scaler Board C.B.A...
Page 46 46 190X6&170X6 LCD Scaler Board C.B.A Go to cover page...
Page 47: Audio Diagram/C.b
190X6&170X6 LCD AUDIO DIAGRAM(170X6)
Page 48 48 190X6&170X6 LCD AUDIO DIAGRAM(170X6) Go to cover page...
Page 49 190X6&170X6 LCD Audio Board C.B.A(170X6)
Page 50 50 190X6&170X6 LCD Audio Board C.B.A(170X6) Go to cover page...
Page 51 190X6&170X6 LCD AUDIO DIAGRAM(190X6)
Page 52 52 190X6&170X6 LCD AUDIO DIAGRAM(190X6) Go to cover page...
Page 53 190X6&170X6 LCD Audio Board C.B.A(190X6)
Page 54 54 190X6&170X6 LCD Audio Board C.B.A(190X6) Go to cover page...
Page 55: Power Diagram/C.b
190X6&170X6 LCD POWER DIAGRAM...
Page 56 56 190X6&170X6 LCD POWER DIAGRAM Go to cover page...
Page 57 190X6&170X6 LCD Power Board C.B.A...
Page 58: Usb Diagram/C.b
58 190X6&170X6 LCD USB DIAGRAM Go to cover page...
Page 59 190X6&170X6 LCD USB Board C.B.A...
Page 60 60 190X6&170X6 LCD USB Board C.B.A Go to cover page...
Page 61: Control&Earphone Diagram/C.b
CONTROL&EARPHONE DIAGRAM 190X6&170X6 LCD...
Page 62 62 190X6&170X6 LCD Control Board C.B.A Go to cover page...
Page 63 EARPHONE BOARD C.B.A 190X6&170X6 LCD...
Page 65: Exploded View
EXPLODED VIEW(190X6) 190X6&170X6 LCD Go to cover page...
Page 66: Recommended Parts List
Recommended Parts List 190X6&170X6 LCD Go to cover page 0030 313815760401 BEZEL ASSY 313815417001 BEZEL 0031 0033 313815567471 LIGHTFRAME STICKER 313815760411 BACK COVER ASSY 0040 0041 313815417011 BACK COVER 0042 313815135811 HINGE-PLATE 0043 313815413491 OSD BUTTON 0044 313815413511 SKIN COVER 0050 313815757301 FOLDABLE BASE(S) 0097...
Page 67: Spare Parts List
190X6&170X6 LCD MODEL:190X6FB/00 2402 202203100179 ELCAP SM HV 25V 10U PM20 R 2608 223878615649 CER2 0603 X7R 16V 100N PM10 R Mechanical parts 2403 223878615649 CER2 0603 X7R 16V 100N PM10 R 2609 202203100179 ELCAP SM HV 25V 10U PM20 R 0030 313815760471 FRONT BEZEL ASSY 2404...
Page 68 190X6&170X6 LCD Go to cover page 5601 242254900451 IND FXD 1206 EMI 100MHZ 80R R 3408 232270461002 RST SM 0603 RC22H 1K PM1 R 2956 223878615649 CER2 0603 X7R 16V 100N PM10 R 5602 242254900451 IND FXD 1206 EMI 100MHZ 80R R 3409 212211805639 RST SM 0603 RC0603 47R PM5 R 2957...
Page 69 190X6&170X6 LCD 932220359668 IC SM TPA3002D2PHP (TI00) R 7932 8901 313819873811 CBLE FAST/100/FAST AWG18 8902 313819873811 CBLE FAST/100/FAST AWG18 313815862941 USB DOWN ASSY 1053 242202518948 CON V 5P M 2.50 64835 B 1811 242202519115 SOC USB H 4P F 2.0/2.5 5409 Y 1812 313819875971 CBLE FAST/60/FAST AWG18 1813...
Page 70 190X6&170X6 LCD Go to cover page Model:170X6FB/00 2610 223878615649 CER2 0603 X7R 16V 100N PM10 R 2404 223878615649 CER2 0603 X7R 16V 100N PM10 R Mechanical Parts 2611 223878615649 CER2 0603 X7R 16V 100N PM10 R 2405 223878615649 CER2 0603 X7R 16V 100N PM10 R...
Page 71 190X6&170X6 LCD 5605 242254900451 IND FXD 1206 EMI 100MHZ 80R R 3411 235003510479 RST NETW SM ARV24 4X 47R PM5 R 3926 212211805669 RST SM 0603 RC0603 10K PM5 R 5606 242254900451 IND FXD 1206 EMI 100MHZ 80R R 3412 235003510479 RST NETW SM ARV24 4X 47R PM5 R 3927 212211805682 RST SM 0603 RC0603 82K PM5 R...
Page 72: Repair Tips/Repair Flow Chart
Repair Tips 190X6&170X6 LCD Go to cover page 0. Warning preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). All ICs and many other semi-conductors are susceptible to - The chip, once removed, must never be reused. electrostatic discharges (ESD).
Page 73 190X6&170X6 LCD Go to cover page 3. Lead-free product identification You can identify lead-free product by Philips-lead-free logo on PCB. 4. Lead-free product repair instruction 4.1 Use only lead-free Solder Alloy 0622 149 00106(1.2mm SAC305) or 0622 149 00108(1.0mm SAC305).
Page 74: Repair Flow Chart
X 21 190X6&170X6 LCD Repair Flow Chart Go to cover page AC IN Power Board Control Board Scaler Board LCD Panel No power (power indicator off) Check 12V/5V/3.3V Bad power board Bad Scaler Board Check Scaler Board Check Control Board Check Control Wires Check LCD Panel...
Page 75 Repair Flow Chart 190X6&170X6 LCD Go to cover page Bad Power Board Power Board Check Scaler Board Bad Scaler Board...
Page 76 X 21 190X6&170X6 LCD Repair Flow Chart Go to cover page Check Scaler Board Check LCD Panel Control Board Board...
Page 77: General Product Specification
. POWER MANAGEMENT CAPABILITY . SOG SUPPORT . TCO 99/2003 . AUDIO . PROVIDE USB PLUG . WALL MOUNT KIT (OPTION) . PROTECTIVE COVER (OPTION) 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 78: General Product Specification
Test conditions Resolution Brightness Image size 4.4.1 Actual display size 4.4.2 Max scan size Brightness uniformity Check cross talk White color adjustment Light frame features 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 79 USB Plug " Reliability Mean time between failures 10.0 Quality assurance requirements 10.1 Acceptance test 11.0 Serviceability 12.0 Philips Flat panel monitors pixel defect policy 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 80: Foreword
This specification describes a 19" SXGA multi-scan color TFT LCD monitor with max resolution up to 1280*1024 /76 Hz non-interlaced. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet, which has an integrated super ergo base. 2.1.1 Type NR.
Page 81: Ambient Temperature
3.1.1 Audio Input signal level: 500mVrms Input signal connector: 3.5 mm mini jack (lime green) Loudspeaker (Impedance: 8 Ohm+/- 15%): 3W+3W stereo for RMS Power 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 82: Interface
Pin No. Description T.M.D.S. data2- T.M.D.S. data2+ T.M.D.S. data2 shield No Connect No Connect DDC clock DDC data No Connect T.M.D.S. data1- T.M.D.S. data1+ 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 83 Position Horizontal Vertical Input Selection Analog, Digital More Settings Language English, Espanol, Frencais, Deutsch, Italiano, Simplified Chinese Phase/ Clock Phase Clock OSD Settings Horizontal Vertical 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 84 Italiano, Simplified Chinese Phase/ Clock (Gray out) Phase (Gray out) Clock (Gray out) OSD Settings Horizontal Vertical Audio Options Stand-alone (On, Off) Mute (On, Off) 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 85: Timing Requirement
1.175(37 lines) 0.381(13 lines) 0.317 ( 10 line ) 0.086( 3 line ) SYNC. H/V - / - - / - POLARITY SEP . SYNC 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 86 0.021 ( 1 line ) 0.018 ( 1 lines) SYNC. H/V + / + + / + + / + + / + POLARITY SEP . SYNC 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 87 0.016 ( 1 line ) 0.014 ( 1 line ) 0.074(4 lines) 0.016(1 lines) SYNC. H/V + / + + / + POLARITY SEP . SYNC 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 88 0.015 ( 1 line) 0.028 (2 lines ) SYNC. H/V + / + + / + + / + POLARITY SEP . SYNC MODE NO. 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 89 : V- Sync width : H- Back porch : V- Back porch : H- Video width : V- Video width : H- Front porch : V- Front porch 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 90 " " selected On and system is in Sleep Mode, follow below condition : Volume has to be adjusted to 0% prior to measurement. 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 91 49.498 75Hz 800X600 37.9KHz 60Hz 832X624 49.7KHz 57.28 75Hz 1024X768 60.0KHz 78.75 75Hz 48.4KHz 1024X768 60Hz 1152X870 68.7KHz 75Hz 1152X900 71.8KHz 76Hz SUN Mode II 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 92 Apply full white pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x,y) coordinate for the screen center should 9300K CIE coordinates X = 0.283 +/- 0.020 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 93 UP / DOWN (Brightness key) LEFT / RIGHT (Volume control) AUTO key Unit dimension / Weight Set dimension (incl. pedestal): 443.8(W) * 436.3(H)* 181.4(D) mm 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 94 : 100% max (< 40 ) - Altitude. : 0 to 30,000 feet Note: recommend at 5 to 35°C, Humidity less than 60 % Transportation tests 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 95 10 G, 11 msec, 1000 cycles Temperature : Bump : 60 % Test Humidity Air pressure : 100 kpa (According to DSD draft standard UAN-D636) 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 96 100m/s^2, 16 msec, 1000 pulses Bump Bump frequency: 60~80times/min Test Source:GB9384-97 Display disturbances from external environment According to IEC 801-2 for ESD disturbances Display disturbances to external environment 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 97 11.0 Serviceability The serviceability of this monitor should fulfill the requirements, which are prescribed in UAW-0346 and must be checked with the check list UAT-0361. 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 98 190X6&170X6 LCD GENERAL PRODUCT SPECIFICATION Go to cover page 12.0 Philips’Flat Panel Monitors Pixel Defect Policy Philips’Flat Panel Monitors Pixel Defect Policy BRIGHT DOT ACCEPTABLE LEVEL DEFECTS MODEL 190P/X 190B 190S 1 lit sub-pixel 4 or fewer 2 adjacent lit sub-pixels...
Page 99 190X6&170X6 LCD GENERAL PRODUCT SPECIFICATION Go to cover page 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 100 Fig 2: Cross talk pattern Gray level 184 (256 Gray level) Fig 3: Cross talk pattern Center at Gray level 0 (Black) B’ A’ 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 101 190X6&170X6 LCD GENERAL PRODUCT SPECIFICATION Go to cover page SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 ThomasChen 2005-05-27...
Page 102 GENERAL PRODUCT SPECIFICATION Go to cover page VIDEO VERTICAL COMPOSITE SYNC. & VIDEO ( SYNC. ON GREEN ) HORIZONTAL VERTICAL FIG-5 TIMING CHART -2 19 Inch LCD Monitor TYPE :190X6FB/00 8639 000 16427 BRAND : PHILIPS 2005-05-27 Thomas chen 2004-05-27...
Page 103: Different Parts List
Different Parts List 190X6&170X6 LCD Go to cover page Diversity of 170X6FB/93 Compared with 170X6FB/00 Item 12NC Description 863900016426 170X6FB/93 1055 313819875861 PSU OPENFR IIPS 43W(AIP-0093) 1060 313819871451 CORD SUB-D 15/1M8/SUB-D 15 BK 1061 313818871651 MAINSCORD CCEE 10A 1M8 DET BK...
Page 104: Safety Test Requirements
104 190X6&170X6 LCD Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot Ground Continuity testing. 3.1. Equipments For example : HI-POT TEST INSTRUCTION - ChenHwa 9032 PROGRAMMABLE AUTO SAFETY TESTER...
Page 105 X-radiation emissions. For continued X-radiation protection, the replacement 3. It is essential that the service technician has an accurate HV meter tube must be the same type as the original, including suffix letter,or a Philips available at all times. The calibration of this meter should be checked approved tupe.

This manual is also suitable for:

170x6fb/93 170x6fw/93 190x6fb/00 190x6/fb/93 170x6fw/00

Philips 170X6FB/00 Service Manual

Service

78 General Product Specification

Quick Links

Chapters

Troubleshooting

Related Manuals for Philips 170X6FB/00

Summary of Contents for Philips 170X6FB/00

This manual is also suitable for:

Table of Contents