Philips 190PS User Manual page 38

FAQs (Frequently Asked Questions)
Q:
How do I use the LightFrame
A:
The control bar is another upgrade that helps you run all LightFrame
The illustration below describes the tasks each button performs.
Screen Adjustments
Q:
What is the FPadjust program on the CD-ROM?
A:
The FPadjust program generates alignment patterns that help you adjust monitor settings
such as Contrast, Brightness, Horizontal Position, Vertical Position, Phase and Clock for
optimal performance.
Q:
When I install my monitor, how do I get the best performance from the monitor?
A:
1.
2.
3.
Q:
How do LCDs compare to CRTs in terms of radiation?
A:
Because LCDs do not use an electron gun, they do not generate the same amount of
radiation at the screen surface.
file:///D|/My%20Documents/dfu/W9/english/190p5/safety/saf_faq.htm (6 of 10)2004-09-21 9:08:31 AM
For best performance, make sure your display settings are set at 1280x1024@60Hz for 19".
Note: You can check the current display settings by pressing the OSD OK button once.
The current display mode is shown in product information in OSD main controls.
To install the Flat Panel Adjust (FPadjust) program located on the monitor setup CD-ROM,
open the CD-ROM and double-click the FP_setup04.exe icon. This will install FP Adjust
automatically and place a shortcut on your desktop.
Run FPadjust by double clicking the shortcut. Follow the instructions step by step to optimize
image performance with your system's video controller.
TM
3 control bar that appears at the top my screen?
RETURN TO TOP OF THE PAGE
RETURN TO TOP OF THE PAGE
TM
3's neat, new features.