Compaq XL240 Maintenance & Serice Manual page 18

Model XL240, XL241, XL242, XL244, XL245, XL246, XL247, XL250, XL340,
XL341, XL342, XL343, XL344, XL345, XL346, XL350, XL352, XL355, and XL356
Service Considerations
During the disassembly and assembly of the Notebook, please keep in mind the considerations listed
below.
Tool and Software Requirements
To service the Notebook, the following items are required:
Torx T-8 or T-9 screwdriver
•
5mm nut drivers (for screwlocks and standoffs)
•
Small standard screwdriver
•
Small Phillips screwdriver
•
Diagnostics software
•
Screws
The screws are not interchangeable. If an incorrect screw is applied during the reassembly process,
it can damage the unit. Compaq strongly recommends that you keep all screws with their respective
parts as they are removed during disassembly. Then replace the screws in their proper locations.
As each subassembly is removed from the Notebook, place it away from the work area to prevent
damage.
18 R S
EMOVAL EQUENCE
Presario 1400 Series
P N
RESARIO
M S
OTEBOOK AINTENANCE AND ERVICE
G 1400 S
UIDE ERIES