Field Setting / Function Setting For Outdoor Air Unit - Fujitsu AUXB04GALH Service Manual

1-8 Field Setting / Function Setting for Outdoor air unit

Classification
Indoor unit field setting
Address
setting by
Filter
remote controller
Airflow
Change of
Function 1
*1: Auto restart is an emargency function such as for power failure etc.
Do not start and stop the indoor unit by this function in normal operation.
Be sure to operate by the control unit, converter or external input device.
*2: Select control conditions of external output.
"Mode 00" is output when heating thermostat is ON, "Mode 01" is output in heating operation, "Mode 02" is output in heating operation and in fan operation.
ITEM
Setting Mode
CODE No.
01 Indoor unit address
02 Refrigerant circuit address
11 Filter indicator Interval
13 Filter sign display
26
Static Pressure setting
- Outdoor air unit Only -
The Range of static pressure is
different from one model to other.
40 Auto restart *1
43 Cool air prevention
46 External control
47 Error report target
63 Humidifier control *2
ITEM
CODE No.
00~63 00~63
00~99 00~99
00 Default
Longer
01
02 Shorter
00 Enable
01 Disable
02 Display only on central remote control
05 SP mode 05
06 SP mode 06
07 SP mode 07
08 SP mode 08
09 SP mode 09
10 SP mode 10
11 SP mode 11
12 SP mode 12
13 SP mode 13
14 SP mode 14
15 SP mode 15
16 SP mode 16
17 SP mode 17
18 SP mode 18
19 SP mode 19
20 SP mode 20
21 SP mode 21
22 SP mode 22
31 Normal SP
00 Enable
01 Disable
00 Super low
01 Follow the setting on the remote controller
00 Start / Stop
01 Emergency stop
02 Foreced stop (Start/Stop by RC is restricted)
00 All
01 Display only for central remote control
00 mode 00
01 mode 01
02 mode 02
01-22
Setting Function
Model name Range of static
pressure
ARXH054GTAH SP mode 05 to 19
ARQH140GTAH (50 to 185 Pa)
ARXH072GTAH SP mode 05 to 20
ARQH224GTAH (50 to 200 Pa)
ARXH096GTAH SP mode 05 to 22
ARQH280GTAH (50 to 220 Pa)
Default
00
00
Normal static
pressure
185 Pa
200 Pa
200 Pa