Redialing - Mercedes-Benz B-Class Electric Drive Operator's Manual

cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
When telephoning, you must observe the legal
requirements for the country in which you are
currently driving.
Switch on the mobile phone (see the manu-
X
facturer's operating instructions).
Switch on the multimedia system (see sepa-
X
rate operating instructions).
Establish a Bluetooth
X
timedia system; see the separate operating
instructions.
Press the = or ; button on the steering
X
wheel to select the Tel Tel
You will see one of the following display mes-
sages in the multifunction display:
Telephone READY Telephone READY or the name of the net-
R
work provider: the mobile phone has found a
network and is ready to receive.
Telephone Telephone No No service service: there is no network
R
available or the mobile phone is searching for
a network.
Accepting a call
If someone calls you when you are in the
menu, a display message appears in the multi-
function display.
You can accept a call at any time, even if you are
not in the Tel Tel menu.
Press the 6 button on the steering wheel
X
to accept an incoming call.
Rejecting or ending a call
You can end or reject a call anytime, even if you
are not in the Tel Tel menu.
Press the ~ button on the steering wheel
X
to reject or end a call.
®
connection to the mul-
menu.
Tel Tel
Menus and submenus
Selecting an entry in the phone book
Press the = or ; button on the steering
X
wheel to select the Tel Tel
Press the 9, : or a button to
X
switch to the phone book.
Authorize access to the phone book on the
X
phone.
Press the 9 or : button to select the
X
desired name.
or
To begin rapid scrolling: press and hold the
X
9 or : button for longer than one sec-
ond.
Rapid scrolling stops when you release the
button or reach the end of the list.
If only one telephone number is stored for
X
a name: press the 6 or a button to
start dialing.
or
If there is more than one number for a
X
particular name:press the 6 or a
button to display the numbers.
Press the 9 or : button to select the
X
number you want to dial.
Press the 6 or a button to start dialing.
X
or
If you do not want to make a call: press the
X
~ or % button.

Redialing

The on-board computer saves the last names or
numbers dialed in the redial memory.
Press the = or ; button on the steering
X
wheel to select the Tel Tel
Press the 6 button to switch to the redial
X
memory.
Press the 9 or : button to select the
X
desired name or number.
Press the 6 or a button to start dialing.
X
or
If you do not want to make the call: press
X
the ~ or % button.
menu.
menu.
Z
161